How To Fix Windows 7 Startup Repair Loop Without Cd

My Windows 7 reckoner stuck on the Startup Repair loop

"Several days ago, my HP figurer (running Windows 7) finished an installation update automatically. But when I started information technology the next day, it was in startup repair. I thought it just did its thing, then I left information technology there and went to piece of work home, it was yet in a startup when I returned dwelling repair. So I shut it down once again. But when I booted the it up side by side twenty-four hours, it dismayed me with a black and white screen with 2 options: Launch Startup Repair (recommended) and Beginning Windows Normally. So I clicked the first i but it showed a loading bar and began to load files.

I thought all the problems would be solved, simply no! The HP has ever been in the startup repair loop and I cannot open up anything using the F keys, or even cancel the startup repair process. Can anyone help me with fixing the Startup Repair Windows vii loop later the update? Any help will exist appreciated."

Possible causes of the infinite Startup Repair loop in Windows vii

Many users volition choose "Startup Repair" when the Windows fails to start. But why information technology did not piece of work and went into the Startup Repair loop? Generally speaking, in that location are 2 main causes.

1. Damaged BCD settings

If the boot sector is infected by viruses and other malware, the bootloader and booting chain volition get damaged. And the virus may then preclude Startup Repair from either running or implementing its repair unremarkably. So the infinite loop of Startup Repair occurs.

2. Corrupted boot division

Windows vii/eight/8.1/ten creates a separate NTFS sectionalisation at the start of the disk by default, making a reservation for the core bootloader and BCD configuration. If any improper shutdown, sudden ability failure, or a blue screen of death happens when you are writing to the boot partition, in that location is also a chance that your arrangement is unable to boot and infinitely bike into the Startup Repair.

6 Methods: set Startup Repair Windows seven loop finer

When you lot are unable to boot up Windows xi/10/8/7 equally it is stuck rebooting itself and never past the Startup Repair, an Os reinstallation tin be a guaranteed solution. Simply that will require a lot of time. And then here we share yous with the following methods to solve the Windows 7 Startup Repair loop instead of a fresh reinstallation.

Method i. Rollback to the recent Windows seven update

If your Windows seven is stuck into an space Startup Repair loop after an update, yous can try to roll back the Windows 7 update in the Safe Way (since the Windows cannot boot as normal).

ane. Access the Safety Way by pressing the F8 key while the system is booting upwardly. It will bring up the "Avant-garde Boot Options", in which you can choose:
• Safe Mode
• Safe Mode with Networking
• Rubber Mode with Command Prompt

Employ the arrow keys to select the Safety Mode you adopt and press Enter afterward that.

2. Once you lot accept booted into Safe Mode, you will see an environment that'due south similar to the usual Windows 7 desktop. Now yous can search for "Programs and Features" nether the Start Carte du jour. Then click on "View installed updates".

3. So you will see a listing of updates you accept installed. Find out the most recently installed updates, which nigh likely has caused the Startup Repair loop,

4. Once you take found the nigh recent update, you can right-click on information technology and select "Uninstall" to remove it.

Then, y'all can restart your Windows 7 computer to bank check if the problem has been resolved. If the problem persists, go along to the next method.

NOTE: If you are unable to get-go your Windows 7 reckoner normally afterwards installing new drivers or irresolute settings, yous tin endeavour the "Last Known Good Configuration" option before trying Safe Mode. This tin can load the drivers and registry information that worked the terminal time you successfully started and then close downwardly Windows vii.

Method two. Disable Automated Restart

you can attempt to disable or abolish automatic restart, although it could not solve the kicking error, it can provide more than information to help you find out the real culprit.

The "disable automatic restart on system failure" option tin be seen in the Avant-garde Boot Options window. Here is how to trigger this action.

one. Restart your computer. Wait for your BIOS to complete POST (the screen with your manufacturer logo and/or arrangement data)

2. Chop-chop begin pressing F8 constantly, until the list of boot options appears.

3. Select "Disable automated restart on organisation failure", printing "Enter" and wait for your computer to boot.

Method iii. Run chkdsk on the boot volume

The command line chkdsk tool can be used to bank check, or even repair the drives to tackle file system corruption. To run chkdsk, please practice equally follow:

1. Insert your Windows 7 installation disc into the CD bulldoze, and boot Windows from the disk.

2. Press any key when you come across "Press any key to boot from CD or DVD."

3. Click "Repair your computer" and expect for Startup Repair to browse your PC for Windows installations, then select your OS from the listing.

4. Choose "Control Prompt" from the Arrangement Recovery Options menu.

v. Once the control prompt window is launched, enter the command "chkdsk /f /r c: " to bank check your installation for corrupted, invalid, or deleted system files (c represents the drive where Windows is installed). Then, CHKDSK will brainstorm scanning your drive for problems, fixing them if information technology can.

Or you can input the "sfc /scannow " command to verify the integrity of every protected operating organization file on your computer.

Method iv. Run bootrec to prepare damaged or corrupted BCD settings

If the bootloader installation or configuration comes with some errors, the Startup Repair loop could happen also. But you tin manually try to rebuild the BCD (kick figuration data), sectionalisation boot sectors, and master boot record past running bootrec. Open up a Command Prompt window, input the following commands, and press Enter after each.

◆bootrec /fixmbr
◆bootrec /fixboot
◆bootrec /rebuildbcd

Afterwards this, your Windows vii should not go into the Startup Repair loop.

Method 5. Perform a System Restore

Since System Protection is enabled by default, you lot can use information technology to restore your computer to an earlier land. And yous tin can run System Restore to your Windows 7 under Windows Recovery Surroundings. To access System Restore, follow the same steps in the 3rd method to reach the System Recovery Options screen, click on "System Restore" and follow the educational activity to cease the operation.

Method 6. Rebuild MBR without installation disc

As you tin see, most solutions require the apply of the Windows setup CD or DVD. I desire to fix the Startup Repair loop in Windows 7 without an installation disk, you lot tin can use AOMEI Partition Assistant Standard instead, which can help you make a bootable USB (flash) drive, boot your computer from it, so rebuild MBR in WinPE style.

1. Connect a blank USB (over 8GB) to a working figurer (since your Windows 7 computer cannot boot). So download the freeware.

2. Install and run AOMEI Partitioning Assistant. Click on the Brand Bootable Media in the left pane. Follow the wizard to create a WinPE bootable USB. Disconnect the USB drive afterwards it is done.

Tip: AOMEI Sectionalization Assistant Standard is pre-installed on the bootable USB drive.

3. Plug the USB into your Windows 7-based figurer with a startup repair loop, power up it, and enter BIOS to make the bootable USB the first boot device, then restart the figurer to Windows PE manner.

four. Once logged in, the AOMEI Segmentation Assistant Standard will load and commencement. Right-click the system disk you demand to repair and select "Rebuild MBR" from the drop-down menu.

5. A mini window will appear, choose the proper MBR type for Windows vii and click "OK".

half-dozen. Click "Use"->"Proceed" to commit the change.

Finally, remove the USB stick from your computer and restart your Windows 7 to bank check whether the Startup Repair loop is canceled or not. Y'all can also use its "Check Partition" characteristic to bank check the system drive for errors and set up them when necessary.

Bottom Line

This article shows you how to go rid of Startup Repair Windows 7 loop, no matter whether you have an installation disc or not. And so don't need to worry adjacent fourth dimension when the windows 7/8/10/11 startup repair loop is taking forever and you cannot finish or cancel information technology.

If you upgrade Standard to Professional edition, you can enjoy more amazing functions like recovering deleted boot sectionalization, extending system bulldoze, quickly partitioning hd without formatting, and more. Moreover, its Server edition can help repair Windows Server 2022 R2, 2008 R2, and 2022.

Source: https://www.diskpart.com/windows-7/startup-repair-windows-7-loop-7201.html

Posted by: joneslacquess39.blogspot.com

Share this post